What is a vertical tillage disc?

Vertical tillage disc is a tillage tool that cuts through residue and leaves most of it on the surface instead of burying it. It sizes residue and opens the top few inches of soil without turning it over.

Why it matters on the Prairies

Harvested grain stubble field with heavy residue matting and trash coverage in autumn
Photo by Arian Rad on Unsplash

Heavy residue is the usual trigger. After a big canola or corn crop, thick mats of trash can slow soil warming in spring and plug seeder openers. In fall, the pass can level harvest ruts before freeze-up.

With the toolbar opened up, a vertical tillage tool levels ruts and mixes trash. It does not control weeds, and it does not fix deep problems. A Saskatchewan Pulse study on flax stubble at Central Butte found wheat, pea and canola yields after vertical tillage were not significantly different from other residue treatments.

How producers handle it

There are two windows, one in the fall after a heavy crop and the other in spring before seeding.

The angle sets the job. At 0Β° the coulters slice straight through and leave the surface close to how they found it. Open the toolbar toward 14Β° and the blades move soil, mix residue and level ruts.

Watch soil conditions. Tillage on wet soil compacts it and leaves big clods that hurt seeding depth, and soils near field capacity are the most vulnerable. In a wet spring, the flat setting lets the field dry and warm without smearing. Every pass also dries the soil. Manitoba Agriculture puts one pass at about 0.5 inch (12.7 mm) of water, so only make the passes the field needs.

It works only the top few inches. Wheel-traffic compaction can reach 1 to 3 feet deep, and a vertical tillage pass will not break it. Good crop residue management starts at the combine, with even chopping and spreading. Rolling baskets behind the coulters firm the seedbed. For the basics, see vertical tillage.

Equipment that fits

The Mandako STORM is our vertical tillage tool, built in Plum Coulee in widths from 27 to 40 feet for tractors from 405 hp up. It runs 20-inch coulter blades on 10-inch spacing, works 1 to 6 inches deep, and the toolbar angle adjusts hydraulically from 0Β° to 14Β° while you drive. For narrow roads and stricter transport rules, the Mandako Euro STORM is the 2-section version. In a wet spring, run the STORM at 0Β° and wait until the field can carry the pass.

Related AgriPedia terms

Related Mandako equipment

Other materials
What Is a Tractor Roller?
A tractor roller is a heavy drum pulled behind a tractor to press stones down and firm the seedbed. See when Prairie growers roll and which roller fits.
Read more
What is a chisel plow sweep?
A chisel plow sweep is the wing-shaped point on a chisel shank that lifts and loosens soil. Learn how Prairie farmers use it and what fits.
Read more
What is soybean residue?
Soybean residue is the stubble and trash left after harvest. Learn what it does in the field and how Prairie producers manage it before seeding.
Read more
What is crop residue?
Crop residue is the straw, stalks and stubble left after harvest. See how it affects seeding and spring warm-up, and how Prairie producers manage it.
Read more
What are vertical tillage tools?
Vertical tillage tools size residue and open the top few inches of soil without turning it. Learn when Prairie farmers run them and what fits.
Read more