5-Plex Landroller
The 5-Plex Landroller is Mandako's five-section land roller, and the widest machine we build short of the 7-Plex. We make it in Plum Coulee, Manitoba, in six widths from 62β to 85β, for tractors from 310+ HP on the smallest up to 425+ HP on the largest. Drums are 42β with a 0.625β wall, and the machine carries 487 to 556 lb on every foot of width.
What it does in the field
Rolling presses rocks and root balls back down, flattens ruts and lumps, and crushes residue so it breaks down faster. The surface is left firm, which is what puts seed against soil instead of air pockets and keeps a rough field from drying out through every clod. The second half of the job comes at harvest: with the stones pressed in, the combine header runs lower without picking up rock. Pulses, cereals, hay, grass stands and silage ground all get rolled.
Frame and drums
Main frame is 8βx4βx3/8β tubing with reinforced corners. The five sections hang on ductile cast knuckles with 1-1/2β pins. Each drum is 42β with a 0.625β wall and turns on a 3β shaft in 3β heavy-duty bearings that need no greasing, and every drum takes water when you want more weight on the ground. Sections overlap 2β to 3β, so no strip is left standing between drums.
Hitch and steering
The hitch floats on hydraulics and the wings pivot behind it, so each of the five drums stays on the ground it is over instead of bridging a dip. Both rear wheels steer on hydraulics. On an 85β machine that is the difference between turning the roller around a headland and dragging it around.
Hookup and transport
Four hydraulic ports, 5 GPM at 2800 PSI, and a Category 3 pintle hitch. Hydraulic handles are colour-coded, so hookup takes a minute. A hydraulic wing lock holds the wings for the road. All six sizes fold to 15β-6β wide and stand 5β-10β high; transport length runs from 54β-2β on the 62β unit to 65β-6β on the 85β. Tires are 235/80/R16 10-Ply highway tires, and LED light kits are standard.
Options
A mechanical acre counter keeps track of coverage. A mud scraper kit keeps the drums clean when you roll wet clay. Green or black.
Sizes and options
- Widths: 62β, 65β, 70β, 75β, 80β and 85β. Horsepower requirement from 310+ to 425+.
- Frame: 8βx4βx3/8β frame tubing, reinforced corners, ductile cast knuckles, 1-1/2β knuckle pins.
- Drums: 42βx0.625β (42β x 5/8β) drums, 3β drum shaft with 3β HD bearing, 2β-3β drum overlap, approximately 487 to 556 lb per foot. Ability to add water to drums.
- Hitch and steering: Category 3 pintle hitch, hydraulic floating hitch, dual hydraulic rear wheel steer, colour-coded hydraulic handles.
- Hydraulics: 4 ports, 5 GPM (19 LPM) at 2800 PSI.
- Transport: hydraulic wing lock, LED light kits, 235/80/R16 10-Ply highway tires, transport width 15β-6β on all sizes, overall height 5β-10β.
- Field options: mechanical acre counter, mud scraper kit.
- Colours: Mandako green or black.
- Other widths: 30β to 50β on the 3-Plex Landroller, 88β to 112β on the 7-Plex Landroller.
| Dimension | 62β | 65β | 70β | 75β | 80β | 85β |
| Transport length | 54β-2β | 55β-6β | 58β | 60β-6β | 63β | 65β-6β |
| Transport Width | 15β-6β | 15β-6β | 15β-6β | 15β-6β | 15β-6β | 15β-6β |
| Overall Width | 65β-6β | 68β-6β | 73β-6β | 78β-6β | 83β-6β | 88β-6β |
| Working Width | 62β | 65β | 70β | 75β | 80β | 85β |
| Overall Height | 5β-10β | 5β-10β | 5β-10β | 5β-10β | 5β-10β | 5β-10β |
| Hyd.Req. (@2800PSI) | 5 GMP (19 LPM) | 5 GMP (19 LPM) | 5 GMP (19 LPM) | 5 GMP (19 LPM) | 5 GMP (19 LPM) | 5 GMP (19 LPM) |
| Hyd.Req. (Ports) | 4 | 4 | 4 | 4 | 4 | 4 |
| Horsepower Req. | 310+ | 325+ | 350+ | 375+ | 400+ | 425+ |
| Approx. Weight (lbs/ft) | 556 | 545 | 530 | 517 | 490 | 487 |
| Drum Size | 42β Γ 5/8β | 42β Γ 5/8β | 42β Γ 5/8β | 42β Γ 5/8β | 42β Γ 5/8β | 42β Γ 5/8β |
| Tire Size | ST235/80R16E 10 Ply | ST235/80R16E 10 Ply | ST235/80R16E 10 Ply | ST235/80R16E 10 Ply | ST235/80R16E 10 Ply | ST235/80R16E 10 Ply |
310+ HP for the 62β, 325+ for the 65β, 350+ for the 70β, 375+ for the 75β, 400+ for the 80β and 425+ for the 85β. The tractor also needs four hydraulic ports at 5 GPM and 2800 PSI, and a Category 3 pintle hitch.
15β-6β on all six sizes, and 5β-10β high. Transport length runs from 54β-2β on the 62β unit to 65β-6β on the 85β. The wing lock is hydraulic and LED lights are standard.
No. The hitch floats and the five sections pivot on cast knuckles, so each drum follows the dirt under it. Drums overlap 2β to 3β, which leaves no unrolled strip between sections.
Farmers rolling pulse crops report 1-4 bushels per acre. The gain comes from seed sitting against firm soil rather than air pockets, and from a header that can run low in the fall because the stones are already pressed in.
Tractor first, acres second. The 5-Plex starts at 310+ HP and 62β; if your tractor is under 300 hp, the 3-Plex covers 30β to 50β at 120+ to 200+ HP. Above 85β the 7-Plex goes to 112β.

